We start the detail by hand washing the
vehicle twice using our macro-fiber wash mitt with Dawn dishwashing
soap.
We only use low pressure water for our detail
services. We do not use a pressure washer on your vehicle.
High pressure can do more damage than good. We have spent
thousands so your vehicle will be protected from high PSI
streams of water. We also filter and use heat, this helps
the cleaning process. We heat our water to 200 degrees to
ensure a perfect wash. The filtration system keeps unwanted
minerals from your paint. This keeps water spots from forming
and marring into your clear coat.
Dawn is known to be one of the only soaps
that will take off wax and other known bi-products that were
applied to your automobile previously.
The double hand wash is needed to clean the
surface and prep the surface for the clay bar treatment and
upcoming applications of the Show Car Polishes.
We also do a rigorous deep clean of your
rims and tires using several different specialized brushes
that will not harm your wheels finnish. We scrub the insides
of your rims to make them look as new as we can get them.
We also deep clean the wheel wells for that fresh new car
look.
While the vehicle is still in
the in the wash stage, the Clay Bar is used on the
painted surfaces of the automobile. We will clay your vehicle
two-times to ensure it's free of contamination.
About Clay Bar
Clay Bar removes imbedded contamination
from the paint finish that cannot be removed using conventional
cleaning methods. Clay Bar is non-abrasive and works
like no cleaner, compound or chemical can and is safe for use
on all paint finishes.
The following contaminants are a general description
of some of the contaminants that Clay Bar Clay
Bar removes.
Rail dust- is actually tiny, sharp bare metal shavings
that can adhere and imbed in the paint finish and cause
serious damage when left untreated. Over 70% of new vehicles
are transported from the factory using the rail system,
therefore rail dust is present on new vehicles. There are
many instances where a vehicle travels or is parked near
a railroad in which case the finish is infected with rail
dust.
Brake dust- similar to rail dust, brake dust is also
in the form of tiny, sharp bare metal shavings. In recent
years, asbestos brake pads were replaced with metallic brake
pads, which are actually brake pads made from tiny metal
or metallic shavings. Anytime a vehicle is braking; brake
dust is disbursed into the air and onto the paint finish.
Since the brake dust is now actually tiny particles of bare
metal, this form of brake dust can seriously damage the
paint finish when left untreated.
Industrial fallout- is the general term used for pollution
and can be found in many forms. Eventually, pollution settles
onto the paint finish of all vehicles and can cause serious
damage when left untreated.
Tree sap, Road tar, Bug residue, Paint over spray, acid
rain deposits and other contaminants that adhere and imbed
into the paint finish can cause damage when left untreated.
Contaminants that are left on the paint surface can weaken
the protective properties and even cause serious damage
to the paint finish after a short time.
After the automobile has been
fully clayed, the car gets another wash. This third was really
insures that we have stripped any previous wax, polish or paint
sealant that was placed on your vehicle prior to our arrival.
We then do a final rinse of the vehicle. This
will ensure we have it complete free of any soap or clay residue.
We then start our 3-stage drying
process. First we use water blades that will get up to 90% of
the water off the car to ensure no water spotting.
Next we use our micro-fiber waffle weave drying
towels to soak up the remaining surface water.
Then we come in with blowers to pull out the
remaining hidden water that hides in your mirrors, door handles
and body lines. We want to make sure no water is left prior
to the Polish applications.
Next we use the Evolution
Polish to exfoliate the clear coat to make sure there are no
other contaminates on the vehicle that the clay process might
have missed. This step also help cut down the swirls you see
in the paint.
If your vehicle is heavily swirled you might opt to do a minor-compound
on-site treatment for an additional $45.00. We use a compound
product and work out the holograms and swirls even more up to
20%-30% removed.
About Evolution Polish
Gloss It has been perfecting the Revolutionary
Evolution Paint Correction & Polishing system products
for the past 10 years. Gloss It tested and formulated a
unique proprietary blend of all natural cleaners and self-
diminishing abrasives that is unlike anything in the car
care world.
Evolution polish is our least aggressive
polish in the Evolution Paint Correction & Polishing
system.
Evolution polish is mild cleaner designed
to restore a mirror like shine without leaving swirls or
scratches.
Evolution polish is safe for all conventional
clear-coats, single stage paint, and nano-ceramic clear
coats.
Next we apply the Gloss
Finish Polish. Using the line of products we apply
a coats of Gloss Finish mixed with a combination of the
Gloss Activator.
See just how glossy your vehicle will be once
we have completed our High-Gloss Finish!
About Gloss Finish
Gloss Finish is unique (NSAP) Nano Synthetic
Advanced proprietary based Polymer with extreme hydrophobic
properties.
Gloss finish is the benchmark of our
detail operation in our corporate detail facility for the
past 10 years.
Over 4,000 customer cars annually receive
the Gloss Finish treatment.
Gloss finish produces the perfect shine,
Gloss & Durability of synthetic & the Clarity and
Depth of carnauba.
Gloss Finish uses or exclusive UV-SORB
technology for protection against harmful elements and contains
no hydro-Carbons.
About Gloss Activator
Gloss Activator is reactive catalyst
that cross links and chemically reacts with gloss finish
to give extreme durability and deep gloss.
Gloss Activator is a unique catalyst
is solvent free, contains UV-SORB sun Protection and contains
no Hydro-Carbons.
Additional coats
of the Gloss Finish can be purchased for $15.00 each
coat. A maximum of 5 coats can be applied.
After we have removed the applications
of Polishes we apply Gloss Enhancer to the
paint.
About the Gloss Enhancer
Our Gloss Enhancer provides a mirror like appearance with
true depth, clarity, reflection and shine, while removing
residual dirt, soap and watermarks that can be left behind
from washing.
Gloss Enhancer quick detailer works well in conjunction
with our Clay Bar acting as a lubricating agent
to remove surface contaminants and road pitch.
Gloss Enhancer Contains 5% (NSAP) Nano Synthetic Advanced
Polymer & UV-SORB sun protection which provides protection
against extreme temperatures, salt & moisture.
Also contains our UV-SORB sun protection. Cleans &
Protects in one step. This quick detailer can be used in
direct sunlight.
During the above process we have
not forgotten about the interior of your vehicle. We do a extensive
cleaning on the interior using brushes and special detail tools
that allow us to deep clean your vehicle of dust and dirt. We
deep clean your carpets using a foam base chemicals that will
not leave your carpets wet.
After the deep cleaning you can opt for our
Interior UV-Protection and Leather Seat Condition Treatment.
We also wipe down your door jambs, apply a
formulated dressing for your door seals, put a non-base silicone
tire dressing on the tires and clean the wheel-wells.
Last we deep clean the interior and exterior
windows.
Pricing
for Cars is $160
Pricing
for Trucks is $165
Crew Cabs add +$10
Tono Covers (Painted) add +$5
Custom Lifted, Custom Wheels $CALL
Pricing
for SUV (Range Rover, Tahao, etc.) is $185
Pricing
for Medium SUV (Escalade, Explorer, etc.) add +$10
Pricing
for Larger SUV's (Hummers & Lifted Vehicles) add +$20
(Please email or call for a quote)